- [Multi-purpose] Provides good convenience for the bathroom and washstand, prevents water from flowing out, and achieves the effect of separating dry and wet. It can also be used as a door seal to keep your kitchen and bedroom dry and dust-proof.
- [Material] The bathtub splash cover is made of silica gel, which is soft and elastic. It is a very soft material. It will not hurt when stepping on it, and it can be bent into the shape you want without deformation.
- [Free cut] 39 inches cut to any length you need. Determine the position of the water-retaining strip and mark it with a pen, and then use a knife to cut the water-retaining strip to the length you need.
- [Keep your home away from humidity]: Water plug, suitable for roll-in showers and other places where water needs to be filled: under the shower curtain, next to the shower tray, bathroom thresholds, pool countertops, washing machines, washbasins, toilets, bathtub edges. Remember to use glass glue on the cutting edge.
- [Easy to clean] The surface is easy to clean. Just wipe the smooth silicone surface with a wet towel to restore it. It is soft and harmless, polymer, non-absorbent, waterproof and mildew proof.
Name: Flexible water retention strip
Features: Free bending, dry and wet separation
Package includes: Water retention strip*1
Our waterproof shower threshold prevents expensive floor damage caused by overflow.
High-quality environmentally friendly materials
The threshold of the water-blocking layer is made of silicone rubber, non-toxic, soft and foldable, and flexible design creates various shapes. It can be easily cut to the length you need.
Installation steps and precautions:
(1) Clean the surface and dry it. This is very important.
(2) Determine the location of the water retention zone and mark on the ground with a pen.
(3) Cut the dam body to a certain length with a hacksaw.
(4) Remove the pre-adhesive tape and put it in a suitable place. Use a hair dryer to heat the gum when it’s cold to make it stickier.
(5) Seal all edges of the caulk and wipe off the excess silicone to leave a smooth caulk line.
(6) Let it dry for at least 24 hours without contact with water.
Reviews
There are no reviews yet.