- ♂️【DIMENSIONS】Steerer Tube diameter: 28.6mm (1-1/8″), Handlebar Diameter: 31.8mm (1-1/4″) or 25.4mm (1”), Length: 90mm / 110mm / 120mm
- ♀️【MATERIAL】The bike stem is made of 6061 aluminum alloy, which is lightweight, high in strength, corrosion resistant and will not be deformed
- ♀️【ADJUSTABLE ANGLE】The angle of the bicycle stem can be adjusted from 0 to 60 degrees, so that you can choose the right angle according to your personal needs, and the riding would be more comfortable
- ♂️【EASY INSTALLATION】Just connect up the original front fork stem, adjust the angles and tight all the bolts to holds bar firmly
- ♂️【APPLICATION】 The bike handlebar stem is suitable for most road bike, fixed gear bicycle, mountain bikes, etc
Product Description
Package include:
2 x Allen wrench
2 x washers ( If the height of the stem is not enough during installation, you can add washers.)
Specification:
Material: Aluminium Alloy 6061
Color: Black
Weight: 247g / 281g
Handlebar diameter: 25.4mm (1”) / 31.8mm (1.25”)
Front fork stem diameter: 28.6mm (1-1/8″)
Adjustable angle: -60°/+60°
Hole centerline spacing: 90mm / 110mm / 120mm
- Durable and lightweight.
- Anti-corrosion and anti-oxidation.
- Easy to install.
- Suitable for most bicyles.
Perfect for most bikes
It is suitable for most road bike, fixed gear bicycle, mountain bikes, downhill bike, track bike, MTB, BMX, etc.
We have 31.8mm (1-1/4″) or 25.4mm (1”) handlebar diameter and 90mm / 110mm / 120mm length. You can choose the handlebars stem you need.
Installation Steps
1. Loosening up the front fork bolts with a 5mm allen key, slide the replacement stem onto the steerer, then tighten the bolts.
2. Loosening the expander bolt with a 6mm hex wrench and adjust the position of the stem, then re-tightening the bolts.
3. Center the bars in the stem clamp, get it set at the angle you like, and then reattach the faceplate.
4. Tightening each bolts on the faceplate to complete the installation.
Note:
Make sure the installation is stable and firm before you ride.
