- Spray Principle: Piezoelectric ceramics drive metal plate high-frequency oscillation, ultrasonic liquid atomization. Micrometer-fine water molecules atomize water throughmicropores and disperse it into the air.
- High-frequency oscillation, micrometer aperture, large atomization amount, fine mist particles, high spray rate, spray variety, timed shutdown.
- The white piezoelectric ceramic ring surface is the front spray surface, which is installed upward, All steel sheet surface is the suction surface on the back, installed downwards. The red wire is positive and the black wire is negative.
- Fine Spray Particles: The atomization plate adopts the design of intermediate spray, 5um ultra fine spray aperture and 740 ultra dense spray aperture. Spray particles are fine and do not wet the desktop.
- Application: Ultrasonic mist maker is a humidifier DIY kit, which is widely used in atomization equipment such as USB humidifier, perfume atomizer, aromatherapy atomizer, etc.
5V USB Humidifier Atomization Plate Circuit Board Atomization Disc
Parameter:
Package Inlcuding: 5sets USB Humidifier Atomization Module
PCB Board Size: 35mm*19mm/1.38*0.75inch
Voltage: 5V
Current: 300mA
Frequency: 110KHz
Power: 2W
Aperture: 5um
Holes: 740
Wire length: 80mm/3.15inch
Atomized steel sheet diameter: 16mm/0.63inch
Rubber ring diameter: 20mm/0.79inch
Rubber ring thickness: 4mm/0.16inch
Work Temperature:0℃~85℃
Work Humidity:10%~90%RH
Atomizer material: shockproof silicone ring, piezoelectric ceramic ring, stainless steel sheet
How to Use It:
1.Charge it with an USB power cord.
2. Place the atomizer on a shallow surface or sponge in water. Note that the welding surface of the atomizer plate faces upwards.
3. Press the key to start it. Then Enjoy Your Soft Moist Air.





Reviews
There are no reviews yet.