- Compatible for ROVE R3 Dash Cam with USB Type C This dash cam hardwire kit is specially designed for ROVE R3 touch screen, 3 channel dash cam to be used for 24-hours parking monitor.
- 24/7 Parking Monitoring ROVE R3 has a 24-Hours Parking Monitor feature – This feature is used with an R3 hard wire kit, which provides continuous power to your R3 when your car is parked.
- Clean Installation – USB Car Charger NOT Required You can use this dash cam hardwiring kit for clean installation in your car. This dashcam hardware kit connects to your car’s fuse box directly.
- A Complete dashcam hard wiring kit All necessary fuse taps, volt meter, and other components are included in our kit for an easy installation and user experience that you will only get with ROVE.
- Easy DIY Installation Our products come with a beautifully written user manual, and how-to videos are also available for you..100% USA-CHICAGO BASED CUSTOMER-CENTRIC COMPANY & CUSTOMER CARE – This ROVE R3 Dash Cam Kit is backed by full 1-YEAR . You can text us for (Faster Response) or Email our customer care and we will answer any of your questions and resolve arising issues fast. If you’re having any doubts, it comes with a FULL REFUND within 30 DAYS
Product Description
ROVE Ultimate 3-Lead Hard Wire Kit With USB Type – C For ROVE R3 & R2-4K PRO Dash Cam Models –
ROVE Ultimate 3-lead Hardwire Kit – USB Type-C is a power management device that provides power to your R3 & R2-4K PRO dash cam models and most other dash cams with a USB Type-C connector from your car’s battery via fuse box to keep your device continuously running even after your car’s engine is turned OFF to utilize the 24-HR Parking Monitor feature.
COMPATIBILITY
The ROVE Ultimate 3-Lead Hard Wire Kit With USB Type – C is Specially designed for:
- ROVE R3 Dash Cam, 3” IPS Touch Screen, 3 Channel Dash Cam Front, and Rear with Cabin.
- ROVE R2-4K PRO Dash Cam, Front Channel 4K Dash Cam, Built-in 5G Wi-Fi, GPS, Supercapacitor.
Complete Installation Tools Set Included – Easy to Install – Designed for 24-HR Auto Trigger Parking Monitor
Decide A Perfect Place To Mount Your ROVE R3 or R2-4K PROThe best place to put the dash cam is where you can easily use it. That means the camera view is unobstructed, you can easily remove it when needed, and it is discreetly placed. The key to mounting a dash cam is placing it where the ROVE R3 or R2-4K PRO have a clear view and it doesn’t block your view. | Locate The Fleet’s Fuse BoxLocate your vehicles fuse box using your Fuse Box Diagram. This information can usually be found in your vehicle’s Owner’s User Manual or from your manufacturer’s website. You can access the fuse box simply by lifting a tab or pulling a panel with your fingers, Or some may require the included trim tool. | Determine The Correct Fuse Slot For InstallationYou will need to find two fuse slots to be used in this step.
|
Install An Add-A-Fuse Tap1. If you are using the previously identified fuse slot that has an existing fuse in it, then insert that existing fuse into the lower empty slot of the Add-A-Fuse with the correct orientation. (See BLUE Arrow in the above image) 2. However, if your previously identified slot is empty and there is no existing fuse in it, then you can just install the Add-A-Fuse directly without needing to install 2nd fuse into the empty slot of an Add-A-Fuse tap. | Fit The RED & YELLOW Fuse Taps To The Respective SlotsYELLOW: Now turn your car keys to ACC position. Now touch the voltmeter to the aluminum end of the YELLOW Add-A-Fuse to check the voltage. Your voltmeter should read the incoming voltage. It is getting power through the ACC fuse slot. RED: Turn OFF the car. Now touch the voltmeter to end of RED Add-A-Fuse. Your voltmeter should read the incoming voltage. If YES, then great job. It is getting power through the always hot fuse slot. | Locating A GOOD Ground PointConnect the BLACK Wire to the Grounding Screw or Bolt. We recommend that you choose the metal Chassis Grounding Screw, or it may cause your dash cam to not function properly and restart/reboot when power does not flow properly. |
TEST THE DASH CAM – TUCKING UP AND ROUTING ALL THE CABLES NEATLY
LOW VOLTAGE PROTECTION – OVER CURRENT/SURGE PROTECTION
LOW VOLTAGE PROTECTION
The ROVE Ultimate 3-Lead Hard Wire Kit – USB Type-C will monitor your voltage status and cut off the power to the dashcam if the voltage drops below the configured value. This minimum voltage cut-off is 11.8VDC for a 12VDC battery and 23.6VDC for a 24VDC battery. This protects the vehicle’s battery. And reserves enough power so you can start your car the next time. You have four different configuration choices that you can select when you want the power to be disconnected from the dash cam when the battery’s voltage reaches a certain level.
OVER CURRENT/SURGE PROTECTION
The ROVE Ultimate 3-Lead Hard Wire Kit – USB Type-C can detect abnormal over-voltage status and cut off power to prevent any damage to your dashcam. Additionally, the ROVE Hardwire Kit has a built-in extra fuse box (2A) to have extra protection.
Reviews
There are no reviews yet.