TECNOIOT 2pcs HC06 Wireless Bluetooth Module with Slave Base

$44.31

Description
  • HC06: The central module uses HC06, the interface cables of the module include VCC, GND, TXD, RXD, LED status output pin, the microcontroller can be judged by the status of the foot. Bluetooth has connected the invalid KEY pin slave.
  • Easy to use: the LED shows the Bluetooth connection status, the Bluetooth connection flashes, turns on the Bluetooth connection and opens a port. Backplane. 3.3 V input voltage LDO 3.6 ~ 6 V, the current is approx. 30 mA unpaired, paired with approx. 10 mA, the input voltage prohibits more than 7 V
  • Compact design: open up to an effective distance of 10 metres, more than 10 metres are also possible, but not the quality of the connection of the distance. After the torque, when using the full duplex serial interface, no need to know anything about the Bluetooth protocol, it only supports 8 data bits, 1 stop bit, no parity communication format.
  • Compatibility: AT command does not establish compatibility with the Bluetooth connection. After that, transfer speed, name, password and set parameters are stored. The Bluetooth connection is automatically switched to transmission mode. The connection from the machine, computer, Bluetooth with Bluetooth works from the function with a variety of hosts
Additional information
Brand

TECNOIOT

Color

blue

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TECNOIOT 2pcs HC06 Wireless Bluetooth Module with Slave Base”

Your email address will not be published. Required fields are marked *