1 Pairs Car Battery Terminals Connectors, Battery Master Switch Battery with Red and Black Coated Wing Nuts Terminal Link Switch for Motorcycle Boat Truck Car Van

Features:
– Main body is high-quality brass, one-piece molding, good electrical conductivity.
– Strong oxidation resistance, and good corrosion resistancehighly resistant to corrosion from marine environments and battery acid.
– Designed to fit all standard top of post batteries with positive pole 17-19mm, negative pole 15-17mm.
Installation Steps:
1. Remove the positive and negative poles of the original car from the battery pole and separate them from the battery cable (disassembly-first remove the negative pole, then the positive pole).
2. Press the battery wire of the nose wire onto the battery clamp. Note that the battery wire must pass through the sheath before installing.
3. Install the positive pole first, and then install the negative pole. Put the crimped battery clamp on the battery pole, tighten the screws to fix the battery clamp, and the positive pole installation is complete. The installation method of the negative pole is the same as that of the positive pole.
Battery Terminal Top Post:
Materials : Main Body Quality Brass + Iron Screws
Quantity : 1 positive(red) + 1 negative(black) terminal post
Anode Aperture : 17-19mm
Aperture of Negative Electrode : 15-17mm
Wiring Mode : Tighten the nose screw
Maximum Bearing Current : 300A
Function : Connect the battery and battery cable. As long as the size is suitable, it can be used.
You Will Get:
1 positive(red) + 1 negative(black) terminal post kit.