- 【Pressure Washer Jetter Nozzle】Made of premium stainless steel, not easy to rust and rot. Working pressure is up to 5000 PSI, the maximum heat up to 310° F. The sewer spray nozzle could be connected to a 1/4 quick connector, easy to match and install.
- 【Applications】This sewer jetting nozzle can be applied widely in cleaning applications, such as general sewer, drain cleaning, industrial pipe and tube cleaning to provide good cleaning results and efficient work efficiency.
- 【Practical Design】The pressure washer drain jetter hose nozzle designed with 1 forward jet and 6 rear jets, 1 forward hole is great for cutting debris and breaking up stubborn dirt forward, 6 backward holes could drive the nozzle forward and flush debris.
- 【Pressure Washer Coupler Secure Fittings】Made of premium and durable brass1/4″ NPT (6.35mm) brass socket quick coupler and female thread fitting. Ball lock design could ensure a solid connection and prevents the water leakage.
- 【Quick connect】Convert 1/4″ quick connect socket to 1/4″ female NPT: It fits most pressure washer equipment, ideal tool for quick exchange of nozzles and spray guns. Working pressure is rated to 5,000 PSI. Attaches the nozzle and quick connector directly to your power washer hose for daily using.
Features:
They could be used for cleaning the soft sewer blocked of oil blocks, fine sand, fine gravel blocks, drain cleaning, industrial pipe, general sewer, washing machine, wash basin, toilet, and general waste obstruction etc.
The sewer spray nozzle could be connected to a 1/4 quick connector, make the water more powerful, easy to match and install. Resolve your drain pipe blockage problem easily. You could remove the pressure washer Jetter nozzle from the jetter by using 1/4 quick connect matched in our package.
You could adjust the pressure to use it in the French drain corrugated plastic tubing safely. It could used in 5000 PSI/ 4500 PSI/4000 PSI / 3700 PSI pressure washer.The higher your power washer psi the better results you’ll get out of cleaning your drain and sewage lines. It could generate enough thrust to go vertically up a downspout.
Assume you refer to a roof gutter down spout. It would “climb” the down spout though you may have to either remove the angled fitting at the base or assist the movement of the jetter hose around the inner edge of the bottom fitting. Ensure that the water supply flow rate is at the required level. Since the nozzle and hose would be working vertically, you would not have the benefit of a flooded “pipe” that usually eases the movement of the hose along the pipe. Gravity will force all liquids and solids to fall away to the ground.
If drain pipes are open at bottom, then push down. If pipes are connected to storm sewer then push debris up.
You could remove the old quick release by wrenches. If failed, it means your quick release is glued.
Specifications:
Color: Silver/gold
Material: stainless steel, brass
Jetter Hose Nozzle Size: 58 x 17mm,Not work with garden hose. Quick Connector Size: 31mm, 1/4″ quick connect to 1/4″ female, fits 1/4″ quick connect nozzles.
Packing List:
1 x sewer nozzle
1 x Quick Connector
Reviews
There are no reviews yet.