- Valve Type: 2 Way Normally Closed (Valve opens with energized)
- Port Size: 1/4″ NPT Female Port
- Coil Voltage: DC 24V
- Service Media: Air, Gas, Liquid, Water
- Operation Model: Direct Acting; Flow Model: Uni-Directional
Product Description
Products Features:
- The valve body is made of high precision aluminum and has strong pressure resistance,good Seal, safe and reliable to use.
- The friction resistance in the hole is small, the starting air pressure is low, and the service life is long. Smooth work, no jam in high-speed use.
- Compact size, easy to assemble and disassemble.
- The 2v025-08 high-precision guide head is adopted, which is sensitive in response, and the response speed can reach 5 times/second.
- This product widely controls the flow of various types of fluids, such as air, water, mud, liquid metal, etc.
2-way normally closed solenoid valve is to control On/Off of air and inert gas.
Operation principle: ln En-ergized State, Inlet &outlet Holes Open. ln Non-energized State,Inlet & Outlet Are Closed.
We have solenoid valves of various specifications. Each solenoid valve has two interfaces. A 1/4 inch or 1/8 inch NPT inlet and a 1/4 inch or 1/8 inch NPT outlet.
Product Details:
Safety & Convenience:
Our cap is made of waterproof material, which prevents metal screws from being exposed to the outside and fingers fromdirectly touching metal.lt’s easier to use than others. lt can be screwed directly by hand,without a screwdriver.
High Quality:
It adopts aluminum valve body with fine surface treatment, high durability and low air leakage. High-precision valve stem and seal design ensure sealing. Adopt pure copper high-precision pilot head inside, with high sensitivity, stability and no jamming. Long-term use is not easy to heat.
2 Way Normally Closed:
The screw threads of the inlet and the outlet are smooth, so that the working speed can be well ensured. Allows you to quickly install and disassemble.
AOMAG 2 Way 2 Position Solenoid Valve
Product Specification
- Material:Stainless Steel, Aluminum
- Exterior Finish:Stainless Steel, Brass
- Type: 2 Way 2 Positions
- Inlet = Outlet = 1/4″ FNPT or 1/8″ FNPT
- Inlet Connection Type: National Pipe Tapered
- Specification Met: CE, ISO 9001, RoHS
- Voltage: DC12V,DC24V,AC 110V, AC 220V
- Operation Type:Internally Piloted Acting Type
The solenoid valve is equipped with ED 100% packaged coil for continuous service and continuous energization.Solenoid valves with multiple voltages are available for you to choose from.
Solenoid Valve Installation Instructions
- Clean and rinse the impurities in the pipeline before installation.
- Be careful not to drop the debris into the pipeline to prevent blocking the solenoid valve.
- Keep the direction of valve body consistent with the flow direction of medium for installation.
- After the solenoid valve is connected, it should be confirmed whether it should be connected firmly.
Pay Attention To :
- Before use, check whether the components are intact.
- Please pay attention to whether the installation conditions meet the technical requirements, such a Voltage, Working Pressure, Temperature Range, Etc.
- When connecting pipes, pay attention to the dust and other impurities in the pipe fittings to prevent impurities from entering the valve body.
- Avoid using the product in vibration environment as much as possible.
- Pay attention to anti-freezing measures in low temperature environment.
- Pay attention to dust prevention of ntake port & vent port when not in use.
Reviews
There are no reviews yet.