- Microprocessor-controlled – automatically adjusts the charge current and maintainability.Automatic matching of current according to battery type and manual switching of 2A or 6A current
- Provide 2A and 6A charging current matching battery and Float Charger Maintainer, charging safe and extended battery life.
- LCD digital display voltage and power, automatic voltage detection:detection for 6V or 12V battery. Easy to use
- To achieve the highest industry standard of energy efficiency.Dormancy mode, environmental protection and energy saving
- Overcurrent protection, overvoltage protection, overheat protection, reverse protection, with self-stop function.
Product Description
EASY TO USE FOR VEHICLES
CHARGING A BATTERY IN THE VEHICLE
WARNING: A spark near battery may cause a battery explosion.
IMPORTANT: Do not start the vehicle with the charger connected to the AC outlet, or it could result in damage to the charger
NOTE: This charger is equipped with an auto-start feature. Current will not be supplied to the battery clamps until a battery is properly connected. The clamps will not spark if touched together.
CHARGING A BATTERY IN THE VEHICLE
1.Turn off all the vehicle’s accessories.
2.Keep the hood open.
3.Clean the battery terminals.
4.Place the charger on a dry, non- flammable surface.
5.Lay the AC/DC cables away from any fan blades, belts, pulleys and other moving parts.
6.For a negative-ground vehicle (as in most vehicles), connect the charger’s POSITIVE (RED) clamp to the POSITIVE (POS, P, +) battery post. Next, connect the charger’s NEGATIVE (BLACK) clamp to the vehicle chassis or engine block, away from the battery.
7.For a positive-ground vehicle, connect the charger’s NEGATIVE (BLACK) clamp to the NEGATIVE (NEG, N, -) battery post. Next, connect the charger’s POSITIVE (RED) clamp to the vehicle chassis or engine block away from the battery. NEVER connect any clamps to the carburetor, fuel lines or sheet-metal body parts.
8.Connect the charger to an electrical outlet.
9.When charging is complete, disconnect the charger from the AC power, remove the clamps from the vehicle’s chassis, and then remove the clamp from the battery terminal.
CHARGING A BATTERY OUTSIDE OF THE VEHICLE
1.Place battery in a well-ventilated area.
2.Clean the battery terminals.
3.Connect the POSITIVE (RED) clamp to the POSITIVE (POS, P, +) battery post.
4.Position yourself and the “negative post extension” cable as far away from the battery as possible, and connect the NEGATIVE (BLACK) clamp to the cable’s free end.
5. Connect the charger to the electrical outlet.
6. Select the battery type and the charge rate.
7. When charging is complete, disconnect the charger from the AC power, disconnect the negative clamp, and finally the positive clamp.
8. A marine (boat) battery must be removed and charged on shore.
The smart battery charger is easy to use, suitable for charging all types of 6-volt or 12-volt lead-acid battery up to 200AH, to choose 2Amp or 6Amp charging current freely according to the capacity of the rechargeable battery and charging time (2A suitable for the battery below 45AH, 6A for the battery above 45Ah. Please choose the right current to prevent damage to the battery. ) Multi-current function: You can manually switch the appropriate current based on 2A / 6A charging current. The latest technology of the microprocessor detects the battery voltage and will monitor the whole charging process when the battery is fully charged with automatic shutdown. Then it will monitor the battery voltage and maintain the battery charge current. Safety design: overcharge protection, overheat protection, reverse protection and short circuit protection.Flame Retardant ABS Shell LCD digital display: simply view battery voltage and battery charge status.Easy to use LED Indicator: Simply check battery charging status. For cars, light trucks, ships, RVs, farm equipment, annual conferences, gel batteries and deep cycle batteries. 6 amp charging can adjust charging rate and keep your battery in a peak status. While 2 amps with slow charging and small charging current, it will protect large batteries. Easy charging for motorcycles, ATVs, snowmobiles, lawn car.
Automatic voltage detection means that the charger automatically detect 6V or 12V battery.
Specification: Item Weight: 1.0 pounds (455g)
Shipping Weight: 1.16 pounds (525g)
Product Dimensions: 6.4 x 3.66 x 2.13 inches
Color: Black
AC Plug: AU
Input: AC 210-230V 50Hz/60Hz 2.0A
Output: DC 6V 2A; DC 12V 2A/6A
LED screen: Display battery voltage and charging level
Length of cable: 170cm (67inch) + 65cm (25.6inch)
What’s Included in your Packing Box: 1 x battery charger 1 x User Manual
Reviews
There are no reviews yet.