- Turn your existing controlelr for Xbox Series X/S controller into a professional eSport elite controller. Only fits for Xbox Series X/S, for Xbox Core controller (Model 1914)
- 4 Ergonomic programable back buttons added
- Maximum 14 buttons can be assigned to the back buttons
- Compatible with eXtremeRate Clicky Kit, FLEXOR side rails, DTF LED Kit for Xbox Series X/S controller
- The installation process requires customers with high electronic installation experience. The HOPE-FPC boards need to be soldered. Get the installation video guide on Youtube by searching “eXtremeRate Hope Remap Kit for Xbox Series X/S Controller”
Product Description
Prepared for e-Sport Tournaments
|
| NOTICE
|
Installation Tips
- Installation difficulty: high
- Patience needed: high
- Please view the installation video carefully before installation.
- Get the installation video guide on YouTube by searching “eXtremeRate Hope Remap Kit for Xbox Series X/S Controller”.
- If you have any problems during the installation process, please feel free to send us a message.
- The FPC board needs to be soldered and the FPC board should be fixed with double-sided tape before soldering.
- When soldering, please be careful not to pull the Hope-FPC cable, the soldering time of each TP point is less than 1 second.
- After soldering, it can be tested with the test board.
- If all the LEDs on the tester board are not lit, please check P2 and TP35 solder points whether soldering correctly.
- If only some of the LEDs are not lit, please check the corresponding solder points whether soldering correctly.
- Turn the toggle switch to the right, the blue light will be on and then enter buttons programming mode.
- You can activate the remap program during the game and assign a maximum of 14 buttons (A, B, X, Y, L3, R3, LT, RT, LB, RB, Up, Down, Left and Right ) to the back buttons.
Package Includes
- 1* Hope remap board
- 1* Hope tester board
- 1* Hope cable FPC1 & FPC2 & FPC3
- 1* Redesigned back shell with battery cover
- 1* Left/Right side rails
- 4* Back buttons
- 1* Prying tool
- 1* T8h & T6 & Cross screwdriver
- 29* Screws
- Note: The controller and other parts are not included.
Reviews
There are no reviews yet.