- 【2-Part Aerosol Paint】 1 Valve For 2 Can Design,2-parts spray paint innovation mixing 2 chemical components in one aerosol can combine both hardener and paint solution when needed, making it hassle free and user friendly that conveniently substitutes against 1-Part paint.
- 【Durable Bed liner Paint】This bed liner spray gives a durable, abrasion-resistant, non-skid textured finish and protects the surface against scratches, weather, and UV rays. Fast cure time and excellent adhesion. Greatly extends equipment and vehicle life expectancy.
- 【Easy to Use】 Professional aerosol spray that contains 2 Anti-Cloggingnozzles in one can. just a few steps to start. Slaming, shaking,than spray. Compared to brushes and rollers, spraying can reach hard-to-reach areas and no clean-up required, making it a hassle-free and user-friendly alternative to older methods. Just the professional DIY repair you need, saving you money and time.
- 【Just Like Spray Gun】 The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time.2 Anti-Clogging Nozzles can give you different spray Angle and effect. This spray applies smoothly and allow the paint to be sprayed at a consistent volume to achieve a smooth, quality finish just as a professional would while using a spray gun and air compressor.
- Our bedliner spray can is steady, thickly, fast, and neatly. Formulated specifically to enable skilled amateur DIYers to achieve professional quality results with ease. One truck bed liner paint covers a surface area of about 10 to 12 ft² with 2 coats. Suggested uses: truck beds, trailers, vehicle panels, wheel wells and repair existing liner coatings.
Product Description
Samurai 2-parts spray paint system
- Two-component paint (also referred to as 2k paints or 2-Parts paint) are the paints in which a chemical reaction results in paint hardening. Two-component paints consist of a base paint and a hardener.
Features and Benefits
- Patented Single Head 2-component aerosol system
- Spray on granular textured effect.
- One aerosol can system combines both Polyurethane and paint solution.
- Greater rust preventive, weather, fading, scratch and high impact resistance than 1-part paint.
- Hassle free and user friendly that conveniently substitutes against the old conventional air compressor system
Note
- Our Truck Bed Coating can cover surface area about 10 to 12 ft² with 2 coats.
- Recommended number of can for full coverage for truck bed liner with 2 coats as : -)
- 5.5 foots truck bed liner = 5 to 6 cans
- 6.5 foots truck bed liner = 6 to 7 cans
- 8.0 foots truck bed liner = 7 to 8 cans
Apply for substrate of
- Truck bed liner
- Fiberglass
- Metal
- Aluminum
| Customer Reviews | 1.5 out of 5 stars 3 | 5.0 out of 5 stars 1 | 2.6 out of 5 stars 4 | 3.6 out of 5 stars 3 |
|---|---|---|---|---|
| Price | $28.90$28.90 | — | — | — |
| Rust preventative, scratch and high impact resistance | Greater than 1-part paint | Greater than 1-part paint | Greater than 1-part paint | Greater than 1-part paint |
| Weather and fade resistance | Greater than 1-part paint | N/A | Greater than 1-part paint | N/A |
| Adhesion | Great | Greater than 1-part paint | Great | Greater than 1-part paint |
| Coverage with 2 coats | 10-12 sq. ft. | 17-20 sq. ft. | 10-12 sq. ft. | 17-20 sq. ft. |
| Dry to touch (environment temperature at 77°F) | 30 minutes | 30 minutes | 30 minutes | 30 minutes |
| Dry to handle (environment temperature at 77°F | 1 hour | 1 hour | 1 hour | 1 hour |
| Full cure (environment temperature at 77°F) | 7 days | 7 days | 7 days | 7 days |
| Pot life (environment temperature at 77°F) | 4 hours | 8 hours | 4 hours | 8 hours |
| Isocyanate free | ✓ | ✓ | ||
| Non-skid textured finish | ✓ |
Reviews
There are no reviews yet.