- ✅FAST, Durable: Industrial monocrystalline diamonds are electroplated onto a stainless steel base. Up to 5 times faster sharpening than oil stone, water stone
- ✅Multifunctional Sharpener: Sharpen and Hone ALL Hard Material including knife, axe, hatchet, machete, lawn mower blade, spade, drills chisels, shears, carbide, high speed steel, titanium, ceramics and most of super hard material etc. Sharpen dry. No messy oil or water needed.
- ✅Dual Grit: Coarse 325 grit (45 micron) for quick sharpening dull and damaged blade or reset a new edge; Extra fine 1200 grit (9 micron) for honing
- ✅Leather sheath made of genuine cowhide leather can act as leather strop putting the polished finish on edges for razor sharp; 6.6ft/2m. removable paracord wrapped in handle for survival tasks.
- ✅3 YEARS Warranty and Superior After-Sale Service: Sharpal headquarters in CA, US with overseas branches in Germany and Australia, aiming at providing consumers with an easy and cost-effective way to obtain a sharp edge. Manufactured and field-tested to the highest standards.
Product Description
About SHARPAL
Sharpal is a manufacturer of professional and patented multifunction knife and tool sharpeners for the outdoor and sports, garden and workshop, and culinary and kitchen industries. For more than 25 years we have been passionately researching and developing quality products, which provide consumers with an easy and cost-effective way to obtain a sharp edge.
SHARPAL Diamond Sharpener-the fastest and most effective way to sharpen an edge!
Use and Care
There is a ‘break-in’ period for diamond sharpeners. When first use, the surface will appear to be especially rough. This roughness is due to the final manufacturing process and will be removed over time without impacting performance. As the diamond surface wears down, more and more diamond grits are exposed and the sharpener cuts faster.
- Sharpen dry. No messy oil needed
- Initial break-in
- Rough work – coarser grit; Fine work – finer grit
- Clean surface and wipe DRY
- Store DRY
How to use
Place your blade on the heel of the diamond sharpener at the desired sharpening angle and PUSH the blade AWAY from you like you are trying to carve a thin slice off the top of the diamond surface. Push the knife blade across the sharpener as you push to sharpen the cutting edge all the way out to the tip of the blade (See Fig. 1). Repeat this PUSHING stroke several times. Remember to hold the angle as you push and try to maintain a consistent sharpening angle with each stroke. This is the key to obtaining the sharpest cutting edge. | Now sharpen the other side of the blade by placing your blade on the end of the diamond sharpener. PULL the blade TOWARD you like you are trying to carve a thin slice off the top of the diamond surface. As you pull the blade down the length of the diamond sharpener, pull the blade across the sharpener to sharpen the entire cutting edge. Let the tip come off the edge of the diamond sharpener. (See Fig. 2) Repeat this PULLING stroke the same number of times as you did on the opposite side of your blade and try to maintain a consistent sharpening angle with each stroke. | Place the blade on the rough side of leather sheath towards the handle of sharpener at an angle of around 20°. The cutting edge should be towards the handle. With light pressure PUSH the blade AWAY from you across the surface for the length of the leather sheath– beginning at the heel of the knife and ending at the tip. (See Fig. 3) | When you reach the top of leather sheath, turn the blade over to strop the other side of the blade. The cutting edge should be pointed towards the top of the leather sheath and adjust the angle by raising the knife spine at around 20°. PULL knife blade TOWARD the handle across the leather to strop the entire cutting edge. (See Fig. 4) |
Varied Uses
Straight Knife Edge (Including Ceramic Knife)
| Camp and Garden Tools
| Fishhooks
| Other Edged Tools and Pointed Tools
|
| Leather Strop | ✓ | ✓ | |
|---|---|---|---|
| Handle | Paracord Handle | Sturdy Handle | Sturdy Handle |
| Diamond Material Type | 325/1200 Dual-Grit Monocrystalline Diamond | 325/1200 Dual-Grit Monocrystalline Diamond | 325/1200 Dual-Grit Monocrystalline Diamond |
| Diamond Stone Sharpening/Honing Surface | 10.6 cm * 2.2 cm | 10.6 cm * 2.2 cm | 10.6 cm * 2.2 cm |
| Total Product Length Including Handle | 21 cm | 21 cm | 21 cm |
| Recommended Uses | Coarse 325 grit (45 micron) for quick sharpening dull and damaged blade or reset a new edge; Extra fine 1200 grit (9 micron) for honing | Coarse 325 grit (45 micron) for quick sharpening dull and damaged blade or reset a new edge; Extra fine 1200 grit (9 micron) for honing | Coarse 325 grit (45 micron) for quick sharpening dull and damaged blade or reset a new edge; Extra fine 1200 grit (9 micron) for honing |
Reviews
There are no reviews yet.