- 【Dual Band WIFI-Covers A Large Area】The wifi repeater has 2.4G 300Mbps and 5G 867Mbps dual band connection for 4K HD streaming and seamless gaming, you can enjoy efficient work/lag-free entertaining at every corner of your house. NOTE: The wifi range extender helps you get a larger wifi coverage but couldn’t increase the internet speed of the host router.
- 【WPS button-Easy Setup】Just press the WPS button on both extender & router, or type in the browser to connect; accessible from almost any device, including iOS and Android mobile platforms, allows you to achieve one-click networking, easy encryption, and connect right away. The LED light on the wifi booster makes it easy to monitor the connection.
- 【4 Different Modes-Effective】Support Repeater/Access Point /Router/Media Bridge Mode（Three mode options, one network port, enable you to switch between3 modes upon the actual situation; 4 x High Gain external adjustable Antennas optimize signal strength and connection reliability. 1x100mbps LAN + 1x100mbps WAN.
- 【Wide Compatibility】Light and practical design, great for travel and home, you can carry it and easily extend the Internet by mount it on the socket. Complies with IEEE 802.11 ac/a/b/g/n, standards. Compatible with any wireless network, router and Wi-Fi enabled devices.
- 【12 Months Warranty】Friendly prompt online service; 30 days free return service through Amazon; 12 months worry-free warranty. High-quality products provide you a health online environment. If you meet any problems, please be free contact us or refer the FAQ below.
- 【Warmly Tips】If you don’t know how to install this wifi range extender, we have uploaded a video attachment, please check it out. NOTE: No need to worry about the problem of heat generation when the product is working, due to the reason of heat dissipation through the surface, which can reach 125 degrees Celsius heat resistance.
Product Description
WAVLINK New Signal Booster WN575A3 – Eliminates All Dead Zones
Easily Connect by WPS Button:
1) First you have to switch it to WI-FI repeater mode manually
2) Plug the WI-FI repeater into a wall socket
3) Press the WPS on button on the WI-FI repeater for 6 seconds; WPS light will flash for 2 minutes
4) During the 2 minutes, please press the WPS button of your wireless router for 2~3 seconds
5) It’s done and the WI-FI repeater will automatically find the signal
Dual Band Connectivity
The AC1200 Repeater features simultaneous dual bands that deliver speeds up to N300 Mbps + AC867 Mbps, ideal for seamless HD streaming and gaming without interference.
Beamforming Technology
Beamforming Technology is known as the direct focus of wireless signals on your device. This ensures optimal network performance, enabling multiple household members to enjoy simultaneous high-bandwidth activities like HD streaming and online gaming.
New generation wireless standard
The fifth-generation Wi-Fi technology 11AC delivers amazing speed and overall home coverage – three times the speed of current “N” Wi-Fi.
Other feature
WPS Quick Setup Button:One-click fast and secure encryption.
LED Indicator: Monitor network status Connect a wired device to WiFi using the available RJ-45 Ethernet port.
WAVLINK-Bring Technology to Life
Router ModeCreate an instant private wireless network and share the Internet with multiple Wi-Fi devices for most hotels and homes | Access Point ModeCreate a wireless network from a wired source, shares the wifi signal to the wireless device. Suitable for hotel travel. | Repeater ModeExtend existing Wi-Fi to increase signal strength and maximize coverage. Let you enjoy the high-speed Internet experience with uninterrupted signal. |
Insertion Method：
To get maximum performance from the repeater, we recommend that you plug the wifi range extende into the socket as shown in the picture.
NOTE:
1. It’s normal that repeater gets hot during use, especially in summer. We use the surface to Heat dissipation so the inner chip can cool down and stay safe, please don’t worry. You can place it on a separate outlet and make sure there are no obstructions and coverings.
2. We recommend to place it in the middle of router and connected devices for better signal. please don’t place it too close to each of them.
3. The repeater device can only extend the wifi range but not your wifi speed, it can extend your WiFi to places where the router can’t reach.
4. Wireless devices are easily affected by the environment, please make sure there is no other WiFi channels, metal or high power appliances around.
5. Wireless connection supports 2.4G + 5G dual band 1200 mbps, wired connection with LAN/WAN port supports 100mbps.
6. You can find instruction videos on our YT account: Wavlink Official. If there is any problem, please reach out to us for updated firmware.
In the package:
1 x AC1200 Wireless Router
1 x RJ-45 Networking Cable
1 x Quick Installation Guide
FQA:
1. My wavlink device often disconnect from the host router, how do I fix it?
(1)Pls try to upgrade the firmware from our official website(see mannual guide). After upgrading, pls reset the device by pressing the reset button for 6s.(Firmware upgrading and resetting could solve many unexpected problem)
(2)Pls try to change the wireless channel of the host router. (Crowded channel might be another reasons)
For 2.4g,pls choose 1 or 6 or 11.
For 5g,pls choose 36 or 40 or 44.
(3)Check if your router combine 5g and 2.4g signal into one signal.If so, pls try to Separate 5g signal from 2.4g signal, then repeat the signal again.
(4)Try to repeat the 5g signal of the host router to avoid crowded channel.
2. The device is very hot,is that normal?
It is normal the device will get hot, normally this will not affect the usage.
3. The led of the device is not on,what should I do?
(1) Please make sure you should switch the power switch on.
(2) Please try to test the wavlink device at another power socket.(To rule out the problem of the power socket)
If the steps above could not help, please be free to contact our support team.
4. What should I do if only the power led is on?
Please kindly try the steps below:
(1)Try to reset the device by pressing the reset button for 6s.
(2)Try to connect the lan port of the device to the pc via Ethernet cable then check if you could log in the management page.
(3)If you could log in the management page, please try to upgrade the firmware from our website, after upgrading, please reset the device by pressing the reset button for 6s.
5. How to get a larger wifi coverage via wavlink device?
(1)Try to avoid the obstacle between the wavlink device the client especially the wall.(The wall will affect the wireless signal much)
(2)Try to keep the antenna perpendicular to the ground.
6. If the internet speed from the extender is not as expected,what should I do?(In extender mode)
Actually the device work as the wifi ranger extender, it could help the user to get a larger wifi coverage. But it could not increase the internet speed from the host router. And the internet speed should be lower than the speed from the host router.
And there are many methods which might be helpful.
(1).Please try to adjust the position of the wavlink device.
And it is better to avoid too many obstacle like wall between the host router and wavlink device and try to avoid too many obstacle between the wavlink device and the target area.
(2).Try to repeat the 5g signal of your host router, if there is no 5G signal, you could change the 2.4g channel of your host router to 1 or 6 or 11. For 5g signal, we also suggest you should change to channel to 36,40 or 44. Then repeat the signal again.
And normally you could get better performance from the 5g signal of wavlink device.
(3).Try to adjust the antennas correctly.(It is better to make the antenna perpendicular to the ground)
