- 【Essential for resin 3D printing 】 ELEGOO Mercury X Bundle contains 1 washing station and 1 post-curing station, which completes your resin 3D printing experience for post-processing and allows you to wash and cure 3D prints at the same time, maximizing your throughput.
- 【Washing larger prints easier】With a 7.5Liters container, you can directly wash big parts 3D printed on ELEGOO Saturn and Mars 3 as well. Leave the prints on the build plate and set it on the hanger inside the bucket, then the parts will be washed in the stirring solvent removing all the residual resin.
- 【Improve your print quality】The post-curing station comes with 2 light bars with built-in 14 LED lights each and 4 LED lights beneath the turntable. Working with Fresnel lens, they can emit the optimal 405nm wavelength of UV light and increase the quality of the resin 3D prints.
- 【Intuitive and safe operation】ELEGOO Mercury X Bundle adopts a sleek design using a single knob. Press and hold to turn on and off the machine then rotate the knob to set an appropriate time for washing and curing. The UV cover blocks 99.9% of ultraviolet rays and protects your eyesight during post-curing.
- 【Tips and tricks】 After a model is washed, it’s better to dry it first before you put it in the curing station. For parts printed with water-washable resin, it’s better to use running water to wash and not suitable to clean them using the washing station.
Product Description
Double-connector adapter
With a double-connected adapter, when you are using CURE, you can also perform WASH work at the same time, saving your working time.
360 Degree three-dimensional curing
The 360° rotating turntable can solidify the model in all directions. If the UV lamp bead in the L-shaped light bar solves the problem of curing at the top of the model, and at the same time increases the bottom light source design, the bottom curing has no dead corners, so that the entire model can be cured more thoroughly, and the maximum curing size can reach 200*260 mm.
Safer to use
The transparent cover can effectively block 99.9% of ultraviolet rays, and the 800 ML large-capacity water tank is designed with rubber sealing tape, which is safe and reliable.
Humanized user settings
Operate the knob, press and hold for 3 seconds to turn on, the operation is simple and the interface is simple. The maximum adjustment is 30 minutes, and the cleaning and curing time can be adjusted according to your needs.
Separate curing and cleaning
MERCURY X WASH and MERCURY X CURE can work at the same time, one for cleaning and one for curing.
| Maximum Cleaning Volume (Cleaning without platform) | 201mm*124mm*255mm | 201mm*124mm*255mm | 131mm*90mm*220mm |
|---|---|---|---|
| Maximum Cleaning Volume (Cleaning with platform) | 180mm*121mm*153mm | 180mm*121mm*153mm | 124mm*90mm*110mm |
| Maximum Curing Size | φ200mm*260mm | φ200*260mm | φ140*165mm |
| Rated Power | 12W | 12W | 48W |
| Time Setting | 0-30 mins | 0-30 mins | 0-30 mins |
| Wash with platform | Saturn 2, Saturn 8K, Saturn S, Saturn, Mars 4 Max, Mars 4 DLP, Mars 3 Pro, Mars 3, Mars 2 Pro, Mars 2 | Saturn 2, Saturn 8K, Saturn S, Saturn, Mars 4 Max, Mars 4 DLP, Mars 3 Pro, Mars 3, Mars 2 Pro, Mars 2 | Mars 4 DLP, Mars 3 Pro, Mars 3, Mars 2 Pro, Mars 2 |
| Wash without platform | Saturn 2, Saturn 8K, Saturn S, Saturn, Mars 4 Max, Mars 4 DLP, Mars 3 Pro, Mars 3, Mars 2 Pro, Mars 2 and Other Brand Resin 3D Printers (Printing size less than 201×124×255 mm³) | Saturn 2, Saturn 8K, Saturn S, Saturn, Mars 4 Max, Mars 4 DLP, Mars 3 Pro, Mars 3, Mars 2 Pro, Mars 2 and Other Brand Resin 3D Printers (Printing size less than 201×124×255 mm³) | Saturn S, Saturn, Mars 4 Max, Mars 4 DLP, Mars 3 Pro, Mars 3, Mars 2 Pro, Mars 2 and Other Brand Resin 3D Printers (Printing size less than 131×90×220 mm³) |
Reviews
There are no reviews yet.