- Leak-Proof & High Quality: The hose features double protection with a stainless steel casing and a nylon water pipe inner tube (better than EPDM and PVC), to get rid of leak problems, higher quality, and durability, advanced wire drawing process on the surface, good oxidation resistance, exquisite workmanship. You don’t need to worry about scratches, corrosion, or leaking.
- Strong Water Stream: Control the water pressure for a gentle and thorough clean-up. In the Jet spray mode, you will be getting a strong water stream that will be great for cleaning the toilet or potty tool. The bidet sprayer comes with a year’s guarantee!
- Easy and Quick Installation: Comes with the installation kit so you don’t have to buy anything else. You will spend about 10 minutes installing this toilet handheld bidet shower kit without plumping help. The bathroom bidet sprayer has two ways of installation, can be mounted on the wall or toilet tank, is easy to install, and no plumbers are required. (All you have to do is to pay attention and make sure that your toilet tank’s water inlet diameter is 20mm).
- Eco-friendly Cleaning Options: Papers come from trees. Not to mention the trees that were cut down and the water utilized to produce the toilet paper. Now a hand-held bidet sprayer prevents all of this. It is very convenient for all kinds of washing activities which include bathing your pet, washing, cleaning diapers, etc.
- One-Year Warranty: Satisfied service: As a responsible and reliable seller, we give priority to our customers’ shopping experience. If there is any quality problem within one year, replace it at any time. If for any reason you are not satisfied with the handheld bidet sprayer, please email us and let us know. We are responsible for the quality, please rest assured at any time. We will refund you immediately if you are not satisfied. So you can trust us at any time.
Product Description
Meet Roccar handheld bidet sprayer , experience an incredible new life
General T-Valve for most U.S.A water supply connecting.
The nozzle can be mounted to the wall or hung with the toilet water tank.
Adjusts the water pressure depending on how hard you press the trigger.
Installation Instruction
Both connectors are of the same size, but the hexagon nut is connected to the water distributor and the other connector is connected to the faucet.
We have changed the material of the hose from rubber to Nylon,which wears resistance and good toughness.
Thank you for your supprot ,your trust means a lot for our shop.
STEP 1: TURN OFF THE WATER SUPPLY
Turn OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank.
STEP 2: MAKE SURE THERE IS A RUBBER WASHER INSIDE BOTH THE FEMALE ENDS
Confirm that the flat rubber washer is inside the top of your bidet’s T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection.
STEP 3: CONNECT THE T-VALVE AND THE HOSES
Screw the top of the T-valve onto the toilet’s fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet’s water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose.
IMPORTANT: Please turn off the Shut-off Adapter (T-Valve) after each use. because if you don’t turn it off,There is risk of weakening the internal components and over time, It may cause flooding or water damage.
STEP 4: TURN ON THE WATER SUPPLY & MOUNT THE SPRAYER
Turn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumber’s tape. If you’re leak-free, your hand-held bidet sprayer is installed and ready for use!
Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid.
Wall Mount: Use the drywall screws and anchors to attach the holder to the wall.
NOTE: Test the bidet sprayer and t-valve for leaks. if leaking occurs around any of the nuts, turn off the water and tighten the leaking nut % to % turn.Repeat this step until the leaking stops. If leaking continues, unscrew the nut and check the washer to make sure it is seated flat and even in the bottom of the nut.
Multiple USES Of Sprayer!
Better Pets Shower
| Better Toilet Cleaning
| Better Hygiene Cleaning
| Better Mop Cleaning
|
Reviews
There are no reviews yet.